Citroën Jumpy XL Long Body 2016–2023 Rear Bumper Sill Cover – Polished Stainless Steel

Citroën Jumpy XL Rear Bumper Sill Cover

Help protect the exposed rear bumper loading edge of your Citroën Jumpy while adding a clean polished stainless steel exterior detail.

This vehicle-specific rear bumper sill cover is designed for selected Citroën Jumpy XL long-body models from 2016 to 2023. It installs over the upper rear bumper loading edge and helps reduce everyday scratches, scuffs and loading marks caused by tools, parcels, equipment and cargo.

Vehicle Compatibility

Compatible Vehicle Details

• Make: Citroën
• Model: Jumpy
• Body Version: XL Long Body
• Approximate Vehicle Length: 5.30 m
• Compatible Years: 2016–2023
• Installation Position: Upper rear bumper loading edge
• Fit Type: Vehicle-specific

The XL is the longest body configuration of this Jumpy generation, with a long wheelbase and extended rear overhang. Citroën lists the original XL version at approximately 5.30 metres overall length.

Check Before Ordering

Citroën Jumpy models were produced in different body lengths and configurations.

Before purchasing, check:

• XL long-body configuration
• Approximate 5.30 m overall vehicle length
• Rear-door configuration
• Van or passenger configuration
• Rear bumper design
• Upper loading-edge shape
• Product shape against the listing images

Not Compatible With

• Citroën Jumpy XS
• Citroën Jumpy M
• Updated 2024 and later Jumpy unless separately confirmed
• Citroën SpaceTourer unless separately confirmed
• Vehicles with a different rear bumper loading-edge profile
• Peugeot Expert, Toyota Proace or Opel/Vauxhall Vivaro unless separately listed

Shared vehicle platforms do not guarantee identical bumper dimensions or accessory fitment.

Product Details

• Product Type: Rear Bumper Sill Cover
• Material: Stainless Steel
• Finish: Polished
• Colour: Silver
• Quantity: 1 Piece
• Placement: Upper Rear Bumper Loading Edge
• Manufacturer Type: Aftermarket
• Vehicle Type: Van / Commercial Vehicle
• Fitment: Vehicle-Specific Exterior Overlay

The polished stainless steel surface adds a clean metallic exterior detail while covering the exposed upper section of the original rear bumper.

The product installs over the existing bumper and does not replace the original bumper.

Rear Bumper Protection

Commercial vehicles are regularly exposed to contact from tools, parcels, cases and other cargo during loading and unloading.

This Citroën Jumpy XL rear bumper sill cover helps:

• Reduce visible surface scratches and scuffs
• Cover the exposed rear loading edge
• Minimise everyday loading marks
• Add a polished stainless steel exterior detail
• Maintain a cleaner appearance around the rear cargo opening

This accessory is intended for surface protection and exterior styling. It is not designed to provide structural, collision or impact protection.

Package Contents

• 1 × Polished Stainless Steel Rear Bumper Sill Cover

Original Citroën components, installation tools and additional accessories are not included unless specifically stated.

Installation

Before Installation

Dry-fit the product before final installation.

Confirm that:

• The vehicle is the XL long-body version
• The product follows the bumper profile correctly
• Both ends align with the loading edge
• The product does not interfere with the rear doors
• The rear bumper matches the product images

Installation Steps

1. Clean the installation surface thoroughly.
2. Remove dust, grease, wax and polish residue.
3. Allow the surface to dry completely.
4. Position the product before applying final pressure.
5. Check alignment at both ends.
6. Install using the supplied mounting method.
7. Apply firm and even pressure where required.

Do not install on a wet, dusty, recently waxed or recently polished surface.

Fitment Notice

Compatibility depends on the complete vehicle configuration, not only the registration year.

Before ordering, verify:

• Citroën Jumpy
• XL Long Body
• Approximately 5.30 m Vehicle Length
• 2016–2023 Vehicle
• Rear-Door Configuration
• Rear Bumper Design
• Upper Loading-Edge Shape

The stated year range does not guarantee compatibility with every Citroën Jumpy configuration.

Contact Orimo Auto before ordering if the body length, rear-door configuration or bumper shape is unclear.

Shipping and Import Charges

Free tracked international shipping from Türkiye.

Orders are shipped under DAP Incoterms 2020.

Import VAT, customs duties, brokerage charges and clearance fees are not included in the product price and remain the buyer’s responsibility where applicable.